Vickers DG5S4-042C-T-E-M-U-H5-60/H7-11 Electro Hydraulic Valve

Dimension S1:0.7813 in; Dimension N:0.6563 in; Insert Bearing IB:Stainless Steel; Dimension D2:2.4375 in; Width A:1.3750 in; Dimension H:1.0625 in; Shaft Diameter D:1 in; Dimension B:3.6250 in; Dimension J:1.4375 in; Weight W:0.87 lb;

d:20.000 mm; Basic Interchange FAF:-; Basic Interchange BCA:WC87504; Speed Rating-Single and Double Sealed Grease SDG:10000 rpm; Fillet Radius ra:1.00 mm; Width - Overall B:15.9 mm; Basic Interchange NDH:WC87504; Basic Radial Load Rating-Static SCO:6700 N; Old MRC Bearing Number:204FSF1; Width - Out

Limiting speed:5600 r/min; Reference speed:4500 r/min; C:25 mm; Basic dynamic load rating C:44 kN; r min.:0.8 mm; D:52 mm; Fw:45 mm; Mass bearing:0.085 kg; Fatigue load limit Pu:17 kN; Radial shaft seal with a low cross-sectional height, single lip:G 45x52x4;

B:74.00 mm; Basic Dynamic Radial Load Rating C:358000 N; Fillet Radius ra:3.00 mm; Sealed Speed Rating n3:780 rpm; Accessories:Snap-Ring; d:300.000 mm; Grease Speed Rating Open/Shielded n1:1200 rpm; Basic Static Radial Load Rating Co:500000 N; Oil Speed Rating Open/Shielded n2:1500 rpm; D:460.0000 m

Basic Dynamic Radial Load Rating C:23800 N; d:17.000 mm; Basic Static Radial Load Rating Co:16300 N; B:28.00 mm; D:47.0000 mm; Fillet Radius rb:0.60 mm; Oil Speed Rating n2:15000 rpm; Grease Speed Rating n1:13000 rpm; Fillet Radius ra:1.00 mm;

d4 max.:21 mm; dk:25 mm; Basic dynamic load rating C:21.2 kN; G:M 12x1.25; d:16 mm; C1 max.:11 mm; h1:48 mm; α:10 °; Basic static load rating C0:23.5 kN; Specific dynamic load factor K:100 N/mm²;

C:14.5 mm; D:68 mm; ra max.:1 mm; Fatigue load limit Pu:7.65 kN; a:14.797 mm; C1:3.5 mm; db min.:47.5 mm; Calculation factor e:0.37; Calculation factor Y0:0.9; r1,2 min.:1 mm;

Grease:10 600 min-1; d:35 mm; ra:1 max; Da:57 max; rs:1 mm; da:39.5 min; Bearing designation:6007  ; Static (Cor):10.328 kN; Pu:0.469 kN; Dynamic (Cr):15.956 kN;

Grease:64.5 kN; Static (Cor):mm; Oil:7.870 kN; with cylindrical bore:7 500 min-1; Pu:61 kN; D:62 mm; with tapered bore:9 500 min-1; d:30 mm; Dynamic (Cr):mm; rs (min):1 mm;

PG:1/4 NPT; Initial grease fill:2154.6 g; H1:209.55 mm; Labyrinth ring (db shaft position):LOR 175; H:422.275 mm; J max.:635 mm; Bearing:23240 CC/W33; Stabilizing ring:SR-40-34; J1:127 mm; R2:46.038 mm;